|
MAXIMUM PRESSURE FOR INFLATABLE BOAT |
RECOMENDED PRESSURE FOR INFLATABLE BOAT |
TUBES / CHAMBERS |
3.6 PSI (Pounds per square Inch ) or 25 KPa |
3 PSI (Pounds per square Inch ) or 20 KPa |
KEEL |
5 PSI (Pounds per square Inch ) or 40 KPa |
4.3 PSI (Pounds per square Inch ) or 30 KPa |
HIGH PRESSURE INFLATBLE FLOOR |
10 PSI (Pounds per square Inch ) or 70 KPa |
8.7 PSI (Pounds per square Inch ) or 60 KPa |
This pump is the ONLY foot pump unit that can pump up high pressure
air decks to their full operating pressure (10 psi). This is a 2 chamber pump so you pump up the main pontoons of the boat the larger pump chamber (5 L ) and then place the rubber plug in the yellow fitting to “turn on” the higher pressure. This high pressure
chamber is ONLY 1.9 L so to pump the whole boat up using just high pressure setting you will be pumping much longer.